/* ******************************************************************** *
 *                               RCS HEADER                                 
 * $Locker: $
 * $Name: BETA_PATCH $
 * $Log: MW2.INI $
 * Revision 1.6  1995/06/14 12:50:08  dzobel
 * Added "CD not found/copy protection failed" error class and RCS header.
 * $Id: MW2.INI 1.6 1995/06/14 12:50:08 dzobel Exp $
 * ******************************************************************** */ 

[SystemError]
00=SYSERR_OK: life is good
01=SYSERR_UNDEFINED: undefined or unknown error
02=SYSERR_AUDIORES: audio resource (.prj) file not found
03=SYSERR_GRAPHRES: graphics resource file not found
04=SYSERR_AUDIODRV: audio driver not loaded
05=SYSERR_BUFROFFSET: offset of video buffer > 16
06=SYSERR_BUFRALLOC: video buffer allocation failure
07=SYSERR_BWDFILE: world description (.bwd) file not found
08=SYSERR_BADBWDCHUNK: BWD file error or unrecognizable chunk encountered
09=SYSERR_MEMAMOUNT: insufficient free RAM at load
0a=SYSERR_UNKNOWNARG: unrecognized command line argument
0b=SYSERR_BWDLOADPROBLEM: Severe error occured loading BWD file(s)
0c=SYSERR_NOHIMEM: non-cache x/ems requirements not met
0d=SYSERR_GPMEM: error allocating memory for a GAMEPIECE
0e=SYSERR_CLASSMEM: error allocating memory for a class struct
0f=SYSERR_POLYRES: bpl polygon resource(.prj) file not found
10=SYSERR_NOCAREER: error reading career/pilot file
11=SYSERR_NOPREFS: error reading hware prefs file
12=SYSERR_NOCFGWRITE: error writing career/pilot file
13=SYSERR_NOCONTROL: invalid control source flag word
14=SYSERR_NOCOMM: communication setup failure
15=SYSERR_NOMECH: error loading mech-spec
16=SYSERR_OLDAUDIO: digpak driver is outdated
17=SYSERR_AUDIOXBUFR: error allocating audio xems swap buffer
18=SYSERR_RENDERMEM: error allocating renderer scratch buffer
19=SYSERR_TABLEMEM: error allocating trig, sqrt, or clip tables
1a=SYSERR_XRENDERMEM: error allocating renderer xems swap pages
1b=SYSERR_XTABLEMEM: error allocating math table xems swap pages
1c=SYSERR_XOTHERMEM: error allocating mission recorder or geometry xems
1d=SYSERR_GOURAUDVTX: bad vertex record in Gouraud object
1e=SYSERR_STDVTX: bad vertex record in unmapped or automap object
1f=SYSERR_MAPVTX: bad vertex record in mapped object
20=SYSERR_LOADOBJ: error loading object into memory
21=SYSERR_MECHDATA: referenced 'mech is not in mech datafile
22=SYSERR_BLOCKNEST: geometry cache block nesting error
23=SYSERR_BWDREADMEM: Unable to allocate memory for BWD chunk buffer
24=SYSERR_BADBWDHDR: Error encountered in format of BWD file header
25=SYSERR_BWDEOF: Error encountered in format of BWD file header
26=SYSERR_BWDREADERR: Low level error reading BWD file
27=SYSERR_BADVWSPCHUNK: Error in View Spec chunk - probably in ckSize
28=SYSERR_CANTOPENBMPRJMAP: Invalid ID found in BM PRJ Chunk
29=SYSERR_CANTOPENBWDDOSFILE: Error opening DOS BWD file
2a=SYSERR_CANTOPENBWDPRJFILE: Error extracting BWD data from PRJ file
2b=SYSERR_NOTABWDFILE: Unknown header encountered in BWD file
2c=SYSERR_BADBWDCKSIZE: BWD chunk size is too large
2d=SYSERR_BADOBJPARENTID:
2e=SYSERR_BADSCRGID:
2f=SYSERR_BADTHNGID:
30=SYSERR_BADGPCLASSID:
31=SYSERR_CANTOPENPITFILE:
32=SYSERR_CANTOPENVPTFILE:
33=SYSERR_BADANIMTASKID:
34=SYSERR_CANTOPENINCLUDEFILE:
35=SYSERR_CANTOPENMECFILE:
36=SYSERR_CANTOPENWTBFILE:
37=SYSERR_BADOBJCOLLFN:
38=SYSERR_OBJNOTINPRJFILE:
39=SYSERR_NOSCENARIOTBL:
3a=SYSERR_NOGPCHASSISTBL:
3b=SYSERR_STBLINDEXOUTOFRANGE:
3c=SYSERR_GTBLINDEXOUTOFRANGE:
3d=SYSERR_CANTFINDPRJFILE:
3e=SYSERR_STATICDTBLNOTFOUND:
3f=SYSERR_CANTMALLOCSCENARIOTBL:
40=SYSERR_CANTMALLOCMISSIONTBL:
41=SYSERR_CANTMALLOCGPCHASSISTBL:
42=SYSERR_CANTMALLOCFILEIDLIST:
43=SYSERR_CANTLOADMECH:
44=SYSERR_SMMCHUNKS:
45=SYSERR_SMMMALLOCFAIL:
46=SYSERR_SMMBADID:
47=SYSERR_SMMBADSIZE:
48=SYSERR_REVCHUNKNOTFOUND:
49=SYSERR_INCOMPATIBLEBWDREV: BWD file with incompatible rev was found.
4a=SYSERR_UNKNOWNACTIONFOUND: Unknown or illegal action encountered in s.$
4b=SYSERR_SCACHEUNRESOLVED: The Static cache has declared but unresolved items
4c=SYSERR_CANTINITPM: An error occurred in initializing the PM system.
4d=SYSERR_CANTFINDVFXDRIVER: Unable to find video driver file.
4e=SYSERR_DLLLOADERROR: Error occurred during DLL load of video or sound driver
4f=SYSERR_ANIMLOADERROR: Error occurred loading the ANIM file (too many tracks?)
50=SYSERR_VFXDRIVER: Error occurred finding or loading VFX driver (DLL)
51=SYSERR_WRONGPROJFILE: Incompatible project file encountered
52=SYSERR_RADARLOAD: Severe error occurred during radar load.
53=SYSERR_CDNOTFOUND: CD-ROM not mounted.
